Karol Tucki

Karol Tucki

Researcher in Engineering Science

Deputy Director - Institute of Mechanical Engineering, Faculty of Production Engineering: IIM
Warsaw University of Life Sciences, Poland: WULS-SGGW

PhD, Eng.

E-mail: karol_tucki@sggw.edu.pl

Scientific interests: engines, vehicle, fuels, energy engineering, agricultural engineering, environment.

Total impact factor 145.445, h-index (Scopus Citations) 15, h-index (WoS Citations) 14.

ORCID 0000-0001-7340-4100, Scopus Author ID: 26432852100, ResearcherID: W-9635-2018.


Publications

For a list of my publications, please consult: BW

Upcoming event

Special Issue "Fuels for the Future", Feel welcome to join!

Selected recent papers
  • Rodrigues, GS.; Reis, JGMd.; Orynycz, O.; Tucki, K.; Matijosius, J.; Machado, ST. Environmental Impact Reduction of a Trolleybus System in the City of Sao Paulo, Brazil. Energies 2024, 17, 1377. https://doi.org/10.3390/en17061377

  • Valeika, G.; Matijosius, J.; Orynycz, O.; Rimkus, A.; Kilikevicius, A.; Tucki, K. Compression Ignition Internal Combustion Engines Energy Parameter Research Using Variable (HVO) Biodiesel and Biobutanol Fuel Blends. Energies 2024, 17, 262. https://doi.org/10.3390/en17010262

  • Tucki, K.; Orynycz, O.; Swic, A.; Wasiak, A.; Mruk, R.; Gola, A. Analysis of the Possibility of Using Neural Networks to Monitor the Technical Efficiency of Diesel Engines During Operation. Advances in Science and Technology Research Journal (ASTRJ) 2023, 17, 1-15. https://doi.org/10.12913/22998624/172003

  • Ruchala, P.; Orynycz, O.; Stryczniewicz, W.; Tucki, K. Possibility of Energy Recovery from Airflow around an SUV-Class Car Based on Wind Tunnel Testing. Energies 2023, 16, 6965. https://doi.org/10.3390/en16196965

  • Rodrigues, G.S.; Reis, J.G.M.d.; Orynycz, O.; Tucki, K.; Machado, S.T.; Raymundo, H. A Study on the Viability of Adopting Battery Electric Vehicles in Bus Rapid Transit in Brazil Using the AHP Method. Energies 2023, 16, 4858. https://doi.org/10.3390/en16134858

  • Tucki, K.; Orynycz, O.; Mieszkalski, L.; Mendes dos Reis, J.G.; Matijosius, J.; Wocial, M.; Kuric, I.; Pascuzzi, S. Analysis of the Influence of the Spark Plug on Exhaust Gas Composition. Energies 2023, 16, 4381. https://doi.org/10.3390/en16114381

  • Bulgakov, V.; Nadykto, V.; Orynycz, O.; Pascuzzi, S.; Beloev, I.; Yaremenko, V.; Tucki, K. Reduction in Energy Consumption Due to Modernized Cultivation Aggregates. Energies 2023, 16, 795. https://doi.org/10.3390/en16020795

  • Valeika, G.; Matijosius, J.; Orynycz, O.; Rimkus, A.; Swic, A.; Tucki, K. Smoke Formation during Combustion of Biofuel Blends in the Internal Combustion Compression Ignition Engine. Energies 2023, 16, 3682. https://doi.org/10.3390/en16093682

  • Tucki, K.; Orynycz, O.; Dudziak, A. The Impact of the Available Infrastructure on the Electric Vehicle Market in Poland and in EU Countries. Int. J. Environ. Res. Public Health 2022, 19, 16783.https://doi.org/10.3390/ijerph192416783

  • Matijosius, J.; Orynycz, O.; Kovbasenko, S.; Simonenko, V.; Shuba, Y.; Moroz, V.; Gutarevych, S.; Wasiak, A.; Tucki, K. Testing the Indicators of Diesel Vehicles Operating on Diesel Oil and Diesel Biofuel. Energies 2022, 15, 9263.https://doi.org/10.3390/en15249263

  • Shepel, O.; Matijosius, J.; Rimkus, A.; Orynycz, O.; Tucki, K.; Swic, A. Combustion, Ecological, and Energetic Indicators for Mixtures of Hydrotreated Vegetable Oil (HVO) with Duck Fat Applied as Fuel in a Compression Ignition Engine. Energies 2022, 15, 7892.https://doi.org/10.3390/en15217892

  • Tucki, K.; Mruk, R. Experimental Research on the Influence of the Composition of the Fuel Mixture on the Operating Parameters of a Single-Cylinder Common Rail Diesel Engine. Advances in Science and Technology Research Journal 2022, 16(5), 100-109.https://doi.org/10.12913/22998624/153965

  • Wasiak, A.; Orynycz, O.;Tucki, K.; Swic, A. Hydrogen Enriched Hydrocarbons as New Energy Resources - As Studied by Means of Computer Simulations. Advances in Science and Technology Research Journal 2022, 16(5), 78-85.https://doi.org/10.12913/22998624/154001

  • Swic, A.; Gola, A.; Orynycz, O.; Tucki, K.; Matijosius, J. Technological Methods for Controlling the Elastic-Deformable State in Turning and Grinding Shafts of Low Stiffness. Materials 2022, 15, 5265.https://doi.org/10.3390/ma15155265

  • Tucki, K.; Orynycz, O.; Wasiak, A.; Gola, A.; Mieszkalski, L. Potential Routes to the Sustainability of the Food Packaging Industry. Sustainability 2022, 14, 3924.https://doi.org/10.3390/su14073924

  • Tucki, K.; Orynycz, O.; Wasiak, A.; Swic, A.; Mieszkalski, L.; Mruk, R.; Gola, A.; Sloma, J.; Botwinska, K.; Gawron, J. A Computer Tool Using OpenModelica for Modelling CO2 Emissions in Driving Tests. Energies 2022, 15, 995.doi.org/10.3390/en15030995

  • Kuric, I.; Klarak, J.; Bulej, V.; Saga, M.; Kandera, M.; Hajducik, A.; Tucki, K. Approach to Automated Visual Inspection of Objects Based on Artificial Intelligence. Applied Sciences 2022, 12, 864.doi.org/10.3390/app12020864

  • Tucki, K.; Mruk, R.; Botwinska, K.; Mieszkalski, L.; Kulpa, K.; Gruz, L.; Wiszowata, K. Modelling of CO2 Emissions in Driving Tests on the Example of a Compression Ignition Engine Powered by Biofuels. Annual Set The Environment Protection 2021, 23, 744-763.

  • Tucki, K.; Orynycz, O. Bioenergy and Biofuels. Sustainability 2021, 13, 9972. doi.org/10.3390/su13179972

  • Swic, A.; Gola, A.; Orynycz, O.; Tucki, K. An Investigation into the Effect of Electro-Contact Heating in the Machining of Low-Rigidity Thin-Walled Micro-Machine Parts. Materials 2021, 14, 4427. doi.org/10.3390/ma14164427

  • Tucki, K.; Krzywonos, M.; Orynycz, O.; Kupczyk, A.; Baczyk, A.; Wielewska, I. Analysis of the Possibility of Fulfilling the Paris Agreement by the Visegrad Group Countries. Sustainability 2021, 13, 8826. doi.org/10.3390/su13168826

  • Kuric, I.; Klackova, I., Rafailovich Nikitin, Y.; Zajacko, I.; Tucki, K. Analysis of Diagnostic Methods and Energy of Production Systems Drives. Processes 2021, 9, 843. doi.org/10.3390/pr9050843

  • Orynycz, O.; Tucki, K. Total Productive Maintenance Approach to an Increase of the Energy Efficiency of a Hotel Facility and Mitigation of Water Consumption. Energies 2021, 14, 1706. doi.org/10.3390/en14061706

  • Tucki, K. A Computer Tool for Modelling CO2 Emissions in Driving Cycles for Spark Ignition Engines Powered by Biofuels. Energies 2021, 14, 1400. doi.org/10.3390/en14051400

  • Tucki, K. A Computer Tool for Modelling CO2 Emissions in Driving Tests for Vehicles with Diesel Engines. Energies 2021, 14, 266.

  • Tucki, K.; Mruk, R.; Botwinska, K.; Mieszkalski, L.; Kulpa, K. A Comparative Analysis of Approval Driving Tests in the Context of Carbon Dioxide Emissions on the Example of Selected Passenger Cars. Annual Set The Environment Protection 2020, 22, 859-879.

  • Tucki, K.; Orynycz, O.; Wasiak, A.; Swic, A.; Mieszkalski, L.; Wichlacz, J. Low Emissions Resulting from Combustion of Forest Biomass in a Small Scale Heating Device. Energies 2020, 13, 5495.

  • Tucki, K. Orynycz, O.; Mitoraj-Wojtanek, M. Perspectives for Mitigation of CO2 Emission due to Development of Electromobility in Several Countries. Energies 2020, 13(16), 4127.

  • Orynycz, O.; Tucki, K. Technology Management Leading to a Smart System Solution Assuring a Decrease of Energy Consumption in Recreational Facilities. Energies 2020, 13(13), 3425.

  • Tucki, K.; Wasiak, A.; Orynycz, O.; Mruk, R. Computer Simulation as a Tool for Managing the Technical Development of Methods for Diagnosing the Technical Condition of a Vehicle. Energies 2020, 13(11), 2869.

  • Orynycz O., Tucki K., Prystasz M. Implementation of Lean Management as a Tool for Decrease of Energy Consumption and CO2 Emissions in the Fast Food Restaurant. Energies 2020, 13(5), 1-26.

  • Tucki K., Orynycz O., Wasiak A., Swic A., Mruk R., Botwinska K. Estimation of Carbon Dioxide Emissions from a Diesel Engine Powered by Lignocellulose Derived Fuel for Better Management of Fuel Production. Energies 2020, 13(3), 1-29.

  • Orynycz O., Tucki K., Wasiak A., Sobotka R., Gola A. Evaluation of the Brakes Performance Dependence Upon Technical Condition of Car Tires as a Factor of Road Safety Management. Energies 2020, 13(1), 1-19.

  • Tucki K., Orynycz O., Mruk R., Swic A., Botwinska K. Modeling of Biofuels Emissivity for Fuel Choice Management. Sustainability 2019, 11(23), 1-22.

  • Kupczyk A., Gaworski M., Szlachta J., Tucki K., Wojdalski J, Luberanski A., Drozdz B., Krzywonos M. A slug flow model in a long milk tube for designing a milking unit control system. Journal of Animal and Plant Sciences 2019, 29, 1-9.

  • Mikielewicz D., Kosowski K., Tucki K., Piwowarski M., Stepien R., Orynycz O., Wlodarski R. Gas Turbine Cycle with External Combustion Chamber for Prosumer and Distributed Energy Systems. Energies 2019, 12, 1-19.

  • Mikielewicz D., Kosowski K., Tucki K., Piwowarski M., Stepien R., Orynycz O., Wlodarski R. Influence of Different Biofuels on the Efficiency of Gas Turbine Cycles for Prosumer and Distributed Energy Power Plants. Energies 2019, 12, 1-21.

  • Tucki K., Mruk R., Orynycz O., Wasiak A., Swic A. Thermodynamic Fundamentals for Fuel Production Management. Sustainability 2019, 11, 1-19.

  • Tucki K., Orynycz O., Swic A, Mitoraj-Wojtanek M. The Development of Electromobility in Poland and EU States as a Tool for Management of CO2 Emissions. Energies 2019, 12, 1-22

  • Tucki K., Mruk R., Orynycz O., Gola A. The Effects of Pressure and Temperature on the Process of Auto-Ignition and Combustion of Rape Oil and Its Mixtures. Sustainability 2019, 11, 1-17

  • Tucki K., Mruk R., Orynycz O., Wasiak A., Botwinska K., Gola A. Simulation of the Operation of a Spark Ignition Engine Fueled with Various Biofuels and Its Contribution to Technology Management. Sustainability 2019, 11, 1-17

  • Kosowski K., Tucki K., Piwowarski M., Stepien R., Orynycz O., Wlodarski W. Thermodynamic Cycle Concepts for High-Efficiency Power Plants. Part B: Prosumer and Distributed Power Industry. Sustainability 2019, 11, 1-13

  • Tucki K., Mruk M., Orynycz O., Botwinska K., Gola A. Toxicity of Exhaust Fumes (CO, NOx) of the Compression-Ignition (Diesel) Engine with the Use of Simulation. Sustainability 2019, 11, 1-15

  • Tucki K., Orynycz O., Wasiak A., Swic A., Wichlacz J. The Impact of Fuel Type on the Output Parameters of a New Biofuel Burner. Energies 2019, 12, 1-12

  • Zdanowska P., Florczak I, Sloma J., Tucki K., Orynycz O., Wasiak A., Swic A. An evaluation of the quality and microstructure of biodegradable composites as contribution towards better management of food industry wastes. Sustainability 2019, 11, 1-12

  • Tucki K., Orynycz O., Wasiak A., Swic A., Dybas W. Capacity market implementation in Poland: analysis of a survey on consequences for the electricity market and for energy management. Energies 2019, 12, 5, 1-16

  • Kupczyk A., Maczynska J., Redlarski G., Tucki K., Baczyk A., Rutkowski D. Selected Aspects of Biofuels Market and the Electromobility Development in Poland: Current Trends and Forecasting Changes. Applied Sciences 2019, 9, 1-13

  • Kosowski K., Tucki K., Piwowarski M., Stepien R., Orynycz O., Wlodarski W., Baczyk A. Thermodynamic Cycle Concepts for High-Efficiency Power Plans. Part A: Public Power Plants 60+. Sustainability 2019, 11, 1-10

  • Maczynska J., Krzywonos M., Kupczyk A., Tucki K., Sikora M., Pinkowska H., Baczyk A., Wielewska I. Production and use of biofuels for transport in Poland and Brazil. The case of bioethanol. Fuel 2019, 241, 989-996

  • Tucki K., Mruk R., Baczyk A., Botwinska B., Wozniak K. Analysis of the Exhaust Gas Emission Level from a Diesel Engine with Using Computer Simulation. Annual Set The Environment Protection 2018, 20, 1095-1112

  • Krzywonos M., Tucki K., Wojdalski J., Kupczyk A., Sikora M. Analysis of Properties of Synthetic Hydrocarbons Produced Using the ETG Method and Selected Conventional Biofuels Made in Poland in the Context of Environmental Effects Achieved. Annual Set The Environment Protection 2017, 19, 394-410

  • Samson I., Sikora M., Baczyk A., Maczynska J., Tucki K. Technologies used to enhance the biogas and biomethane yield: a review. Przemysl Chemiczny 2017, 96, 1605-1611

  • Kupczyk A., Tucki K., Sikora M., Zubrzycka M., Baczyk A. Comparison of energy expenditures and CO2 emissions in the process for manufacturing compressed methane from corn silage and manure and for production of bioethanol from corn. Przemysl Chemiczny 2016, 95, 1000-1005

  • Krzywonos M., Skudlarski J., Kupczyk A., Wojdalski J., Tucki K. Forecast for transport biofuels in Poland in 2020-2030. Przemysl Chemiczny 2015, 94, 2218-2222

  • Kosowski K., Tucki K., Kosowski A. Application of Artificial Neural Networks in Investigations of Steam Turbine Cascades. Journal of Turbomachinery-Transactions of the ASME 2010, 132, 014501-014505

  • Kosowski K., Tucki K., Kosowski A. Turbine stage design aided by artificial intelligence methods. Expert Systems with Applications 2009, 36, 11536-11542

    • WEB OF SCIENCE CONFERENCE PROCEEDINGS

  • Klackova, I.; Kuric, I.; Zajacko, I.; Tucki, K. Energy and Economical Aspects of Implementation of Virtual Reality in Robotized Technology Systems. 18th International Conference on Emerging eLearning Technologies and Applications (ICETA), Kosice, Slovenia, 2020. doi: 10.1109/ICETA51985.2020.9379176.

  • Orynycz O., Wasiak A., Tucki K., Wiszowata K. Management of the atmospheric pollution mitigation through investment into modernization of heat generation units.V International Conference of Computational Methods in Engineering Science - CMES'20 23-26 November 2020, Lublin, Poland - Lviv, Ukraine.

  • Tucki K., Mieszkalski L., Kulpa K. Energy clusters as tool in pursuit of energy self-sufficiency in selected rural area of poland.Contents of Proceedings of 19th International Scientific Conference. ENGINEERING FOR RURAL DEVELOPMENT, May 20-22, 2020.

  • Tucki K., Mruk R., Botwinska K. Impact of syngas on maximal spark ignition engine power.Contents of Proceedings of 19th International Scientific Conference. ENGINEERING FOR RURAL DEVELOPMENT, May 20-22, 2020.

  • Orynycz O., Tucki K., Wasiak A., Mruk R. Computer modelling of automobile engine performance as the source of implications for automobile technology management.IOP Conference Series. Materials Science and Engineering 2019, 710, 1-8.

  • Tucki K., Maczynska J., Klimkiewicz M., Baczyk A., Sikora M. Feasibility assessment for replacing rapeseed oil by selected vegetable oils in diesel engine. IOP Conference Series. Earth and Environmental Science 2019, 214, 1-11

  • Tucki K., Baczyk A., Klimkiewicz M., Maczynska J., Sikora M. Comparison of parameters and composition of exhaust fumes of engine fuelled by rapeseed oil and its mixtures with diesel and gasoline. IOP Conference Series. Earth and Environmental Science 2019, 214, 1-9

  • Tucki K., Baczyk A., Klimkiewicz M., Maczynska J., Sikora M. Comparison of energy performance and toxicity of diesel engine fuelled with diesel oil, rapeseed oil and oil mixture. IOP Conference Series. Earth and Environmental Science 2019, 214, 1-10

  • Tucki K., Baczyk A., Klimkiewicz M., Maczynska J., Sikora M. Crude rapeseed oil as a fuel for vehicle propulsion. IOP Conference Series. Earth and Environmental Science 2019, 214, 1-10

  • Tucki K., Baczyk A., Rek B., Wielewska I. The CFD analysis of the combustion chamber in Common Rail engines. International Conference of Computational Methods in Engineering Science. MATEC a of Conferences 2019, 252, 04001, 1-6

  • Tucki K., Baczyk A., Mruk R., Wielewska I., Radziszewski P. The simulation model of the grapple loader operation. International Conference of Computational Methods in Engineering Science. MATEC Web of Conferences 2019, 252, 05021, 1-5

  • Tucki K., Baczyk A., Botwinska K., Wielewska I. Paris Agreement in Central Europe - The Case of the Visegrad Group (V4). Conference Proceedings of the International Conference on Sustainability, Human Geography and Environment 2018, Krakow, 28 November - 2 December 2018, 251-259

  • Tucki K., Mruk R., Baczyk A., Botwinska K. The development of the interface solution for the acquisition of information from the OBD system of the vehicle. 26th NJF Congress Agriculture for the next 100 years, proceedings of the 26th NJF Congress, 27-29 June, 2018, Kaunas, Lithuania, Aleksandras Stulginskis University, 2018, 151-156

  • Tucki K., Baczyk A., Krzyzanowska A. The assessment of the functioning of photovoltaic installation under small household conditions. 26th NJF Congress Agriculture for the next 100 years, proceedings of the 26th NJF Congress, 27-29 June, 2018, Kaunas, Lithuania, Aleksandras Stulginskis University, 2018, 146-150

  • Tucki K., Baczyk A., Wielewska I., Piatkowski M. Analysis of the operation characteristics of a selected wind power plant, Heat Transfer and Renewable Sources of Energy HTRSE 2018, E3S Web of Conferences 2018, 70, 01016, 1-8

  • Tucki K., Baczyk A., Bienkowska P. Greenhouse Gas Emissions in Poland. Current State and Reduction Strategies 2020-2050. International Scientific Days 2018, Towards Productive, Sustainable and Resilient Global Agriculture and Food Systems, Conference proceedings, May 16-17, 2018 Nitra, Slovak Republic/eds. Elena Horska, Zuzana Kapsdorferova, Marcela Hallova. Praga, Wolters Kluwer CR, 2018, 2716-2725

  • Tucki K., Baczyk A., Prystasz M.. Options for Implementing Lean Management Elements (Case Study of a Restaurant at the Warsaw Chopin Airport), International Scientific Days 2018, Towards Productive, Sustainable and Resilient Global Agriculture and Food Systems, Conference proceedings, May 16-17, 2018 Nitra, Slovak Republic/eds. Elena Horska, Zuzana Kapsdorferova, Marcela Hallova. Praga, Wolters Kluwer CR, 2018, 510-518

  • Tucki K., Baczyk A., Zimoch M. Analysis of impact of wind on photovoltaic panels. Engineering for Rural Development 2018, 17, 617-622

  • Tucki K., Baczyk A., Lelonkiewicz J. Analysis of selected aspects of energy sector - case study from Skierniewice, Poland. Engineering for Rural Development 2018, 17, 1727-1733

  • Tucki K., Baczyk A., Mitoraj M. Quantitative potential for installation of solar collectors in Jozefow, Poland. Engineering for Rural Development 2018, 17, 1698-1703

  • Wielewska I., Tucki K., Baczyk A., Trzaska M. Impact of key factors on expected development of onshore wind energy sector in Poland and development scenarios. Heat Transfer and Renewable Sources of Energy HTRSE 2018, E3S Web of Conferences 2018, 70, 01017, 1-7

  • Botwinska K., Mruk R., Sloma J., Tucki K., Zaleski M. Simulation of diesel engine emissions on the example of Fiat Panda in the NEDC test. E3S web of conferences 2017, 19, 02003, 1-6

  • Botwinska K., Mruk R., Tucki K., Wata M. Simulation of fuel demand for wood-gas in combustion engine. E3S web of conferences 2017, 19, 01018, 1-6

  • Tucki K., Kupczyk A. Effect of temperature and excess air ratio on combustion process of mixtures of erucic rapeseed. Proceedings of the International Scientific Conference, Rural Development 2017, 342-345

  • Tucki K., Kupczyk A. Influence of the manufacturing technology process on properties of rapeseed oil. Proceedings of the International Scientific Conference, Rural Development 2017, 481-484

    OTHER PUBLICATIONS

  • Tucki K., Wielewska I., Zuzek D., Kacprzak M. Technological and market aspects of vegetable production on a farm. Scientific Papers of Silesian University of Technology 2023, 182, 473-493. http://dx.doi.org/10.29119/1641-3466.2023.182.28

  • Tucki K., Wielewska I., Zuzek D. Selected aspects of a photovoltaic installation analysis for a single-family detached building. Scientific Papers of Silesian University of Technology 2023, 179, 623-637. http://dx.doi.org/10.29119/1641-3466.2023.179.33

  • Mieszkalski L., Tucki K., Kuric I. The method of mathematical shape modelling for the use of the design of biodegradable vessels. Technological development in food processing 2020, 1, 28-38

  • Maczynska J., Kupczyk A., Rutkowski D., Tucki K. Current problems of biocomponents and liquid biofuels sectors in Poland. Gospodarka Materialowa i Logistyka 2019, 2, 23-27

  • Klimkiewicz M., Sokolnicki L., Tucki K. Detection of potatoes damages by thermal imaging. Annals of Warsaw University of Life Sciences, SGGW Agriculture 2017, 70, 105-112

  • Zubrzycka M., Wojdalski J., Tucki K., Zubrzycki M. Prospects for the development of the agricultural biogas sector in Poland. Journal of Agribusiness and Rural Development 2017, 1, 227-237

  • Kupczyk A., Maczynska J., Sikora M., Tucki K., Zelazinski T. The Situation, Prospects and Legal Conditions of the Biofuels for Transport Sectors in Poland. Roczniki Naukowe Ekonomii Rolnictwa i Rozwoju Obszarow Wiejskich 2017, 104, 39-55

  • Kupczyk A., Maczynska J., Sikora M., Gawron J., Tucki K. The Current Situation and Future of Biofuels Used in Member States Transport in the Light of the EU Regulations. Gospodarka Materialowa i Logistyka 2017, 10, 16-22

  • Tucki K., Zimoch M. 3D analysis of machining of wind turbine blade using CAD/CAM software. Part 1 Selection of Aerodynamic Profile of a Wind Turbine Blade. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 99-102

  • Tucki K. 3D analysis of machining of wind turbine blade using CAD/CAM software. Part 2 Wind Turbine Blade Modelling. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 93-97

  • Tucki K. 3D analysis of machining of wind turbine blade using CAD/CAM software. Part 3 Simulation of machining in CAM environment. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 89-92

  • Tucki K., Sikora M. 3D design procedure, fem analyses and optimization of the tillers sprocket. Econtechmod. An International Quarterly Journal on Economics of Technology and Modelling Processes 2016, 5(3), 59-70

  • Tucki K., Sikora M. Modernisation of a coal-fired heating plant to switch to woodchips, in accordance with logistics principles. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 65-70

  • Tucki K., Sikora M., Karlikowska M., Bedkowski W. Selected issues of the economic analysis of a heating system with the direct evaporation heat pump. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 83-87

  • Tucki K., Sikora M., Karlikowska M., Bedkowski W. Selected issues of the technical analysis of a heating system with the direct evaporation heat pump. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 77-81

  • Tucki K., Sikora M. Technical and logistics analysis of the extension of the energy supply system with the cogeneration unit supplied with biogas from the water treatment plant. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 71-75

  • Tucki K., Kominek M. Technical economic analysis of a 0,8MW agricultural biogas plant. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 59-63

  • Tucki K. Use of solar collectors on the example of a water-park. Part 1: Technical Analysis. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 47-51

  • Tucki K. Use of solar collectors on the example of a water-park. Part 2: Economic Analysis. TEKA of the Commission of Motorization and Power Industry in Agriculture 2016, 16(1), 53-57

  • Tucki K. Using the finite element method in the modeling of layered composite delamination. Econtechmod. An International Quarterly Journal on Economics of Technology and Modelling Processes 2016, 5(2), 51-62

  • Tucki K., Piatkowski P., Wojcik G. Selected aspects of the analysis of farm biogas plants sector in Poland. Rynek Energii 2016, 1(122), 54-58

  • Tucki K. Analysis of the process of construction of combustion engine pistons using cam software. Part 1: Geometry calculations. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(4), 171-174

  • Tucki K. Analysis of the process of construction of combustion engine pistons using cam software. Part 2: Development of 3d piston geometry. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(4), 175-182

  • Tucki K. Analysis of the process of construction of combustion engine pistons using cam software. Part 3: CAM modelling of the piston machining process. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(4), 183-190

  • Tucki K. Analysis of the process of construction of combustion engine pistons using cam software. Part 4: Piston strength analysis. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(4), 191-194

  • Tucki K. Analysis of the solar PV supporting structure settled upon a dumping ground. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(4), 195-200

  • Tucki K., Klimkiewicz M., Mruk R., Piatkowski P. Design of digester biogas tank. Part 1: Biogas calculator - tool to perform biogas energy calculations. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(1), 75-78

  • Tucki K., Klimkiewicz M., Piatkowski P. Design of digester biogas tank. Part 2: The design process of digester biogas tank. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(1), 83-88

  • Tucki K., Klimkiewicz M., Piatkowski P. Design of digester biogas tank. Part 3: 3D digester biogas tank model. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(1), 89-84

  • Tucki K., Klimkiewicz M., Mruk R., Piatkowski P. Design of digester biogas tank. Part 4: The stress analysis of digester biogas tank. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(1), 95-100

  • Klimkiewicz M., Botwinska K., Mruk M., Sloma J., Tucki K. Evaluation of depend ability of diesel engine powered with unprocessed rapeseed oil using method of FTA. Logistyka 2015, 5, 191-198

  • Tucki K. Selected aspects of analysis of the process of rapeseed oil pressing as exemplified by an oil mill of daily capacity of 500 tons of seed. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(4), 207-212

  • Tucki K. Selected aspects of construction and use of a solar photovoltaic system with the capacity 1,4MW. TEKA of the Commission of Motorization and Power Industry in Agriculture 2015, 15(4), 201-206

  • Florczak I., Klimkiewicz M., Mruk R., Sloma J., Tucki K., Wojdalski J. Application of FMEA method to solve problems of diesel engines fueled with unprocessed rapeseed oil. Logistyka 2014, 6, 56-61

  • Zak A., Golisz E., Tucki K., Borowski P. Perspectives of biofuel sector development in Poland in comparision to CO2 emission standards. Journal of Agribusiness and Rural Development 2014, 3(33), 299-312

  • Borowski P., Gawron J., Golisz E., Kupczyk A., Tucki K., Zawadzki J., Sikora M., Wojcik-Sztandera A., Piechocki J., Redlarski G. Influence of CO2 Emissions Reduction on the Functioning of the Transport Biofuels Sectors in Poland with Particular Emphasis on Bio-Ethanol Sector. Gospodarka Materialowa & Logistyka 2014, 8, 14-22

  • Klimkiewicz M., Blaszczuk K., Mruk R., Tucki K. Modeling of Fuel Injection Into the Combustion Chamber in a Compression Ignition Engine with AVL FIRE. Inzynieria Rolnicza 2013, 2(143), 113-121

  • Klimkiewicz M., Pankowski S., Mruk R., Tucki K. Comparison of the Carbon Black and Nitric Oxide Emission in the diesel and Rapeseed Engine by Means of Modeling in AFL FIRE Programme. Inzynieria Rolnicza 2013, 2(143), 143-154

Books and book chapters
  • Borowski P., Tucki K., Zubrzycka M. Aspekty prawne dla biopaliw transportowych w Polsce na tle UE i ich ewaluacja. Rozdzial w monografii Wyniki wybranych badan przeprowadzonych w ramach projektu WOODTECH, Oficyna Wydawniczo-Poligraficzna Adam, 2016, ISBN 9788378211235

  • Borowski P., Kupczyk A., Tucki K. Prognoza i atrakcyjnosc sektorow biopaliw transportowych w Polsce. Rozdzial w monografii Wyniki wybranych badan przeprowadzonych w ramach projektu WOODTECH, Oficyna Wydawniczo-Poligraficzna Adam, 2016, ISBN 9788378211235

  • Borowski P., Gawron J., Golisz E., Kupczyk A., Pichocki J., Powalka M., Redlarski G., Samson-Brek I., Sikora M., Wojcik-Szwarc M., Tucki K. Wplyw redukcji emisji CO2 na funkcjonowanie sektorow biopaliw transportowych w Polsce, Oficyna Wydawniczo-Poligraficzna Adam, Warszawa, 2014, ISBN 978-83-7821-084-9

  • Kosowski K., Tucki K. Zastosowanie metod sztucznych sieci neuronowych do projektowania lopatek turbinowych ksztaltowanych przestrzennie. Rozdzial w monografii O zastosowaniu neuronowych symulatorow przeplywu przez kanaly lopatkowe turbin do wyznaczania stanu referencyjnego w diagnostyce cieplno-przeplywowej, Wydawnictwo Politechniki Gdanskiej, Gdansk, 2014

  • Kosowski K., Tucki K. Zastosowanie metod sztucznych sieci neuronowych do projektowania wiencow lopatkowych w stopniach turbinowych. Rozdzial w monografii O zastosowaniu neuronowych symulatorow przeplywu przez kanaly lopatkowe turbin do wyznaczania stanu referencyjnego w diagnostyce cieplno-przeplywowej, Wydawnictwo Politechniki Gdanskiej, Gdansk, 2014

  • Kosowski K., Tucki K. Advanced blanding design. In Steam and gas turbine, 2nd ed. Alstom, France, Switzerland, United Kingdom, Poland, 2007, 429-453, ISBN 9788392595939

Patents
  • Patent 244998. Reactor for biogas production

  • Patent 244726. Belt rake for swath formation from biomass

  • Patent 244041. Milking cluster

  • Patent 243283. Pillar mounted bioreactor with complex-motion aerating mechanical-jet agitator

  • Patent 242820. Self-driven straw briquetting machine

  • Patent 242663. Device for peeling pumpkin slices

  • Patent 242072. Device for the simultaneous grinding and briquetting of wood material, in particular for branches

  • Patent 241627. Machine for removing seeds from pumpkin flesh

  • Patent 241626. Device for washing, cleaning and drying pumpkin fruit

  • Patent 241628. Drill hoe frame

  • Patent 241293. Device for cutting off the top layer of pumpkin or watermelon

  • Patent 240036. Pumpkin fruit slicing machine

  • Patent 240037. Device for removing top layer of large pumpkin fruits

  • Patent 238894. Apparatus for preparing fatty acid methyl esters

  • Patent 238709. Rotor of the rotary harrow with swiveling blades

  • P.448227 Rotor of the rotary harrow with vibrating disc

  • P.448226 Rotor of the rotary harrow with twitching blades

  • P.446212 Furrowing and dosing adapter in particular designed to work with a manure spreader

  • P.443257 Machine for automatic and precise driving of poles

  • P.439165 Adaptive system for measurement of particulate matter content in exhaust gases generated by combustion engines

  • P.447846 Belt weeder particularly suitable for wide-row cultivation

  • P.443257 Device for automatic and precise installation of columns

  • P.440798 Pumpkin harvesting device

  • P.440468 Machine for mechanical processing of apples

  • P.437979 Root vegetable and fruit slicer

  • P.437913 Device for removing pumpkin seeds

  • P.437332 Trailer for the collection of cylindrical bales of stolk materials

  • P.436908 Aggregate for soil cultivation

  • P.431967 Pillar mounted bioreactor with complex-motion aerating mechanical-jet agitator

  • P.431977 Bioreactor with mechanical agitator with a complex feed and rotary-reciprocating motion

  • P.428775 Drum dryer for seed preparation

  • P.427708 Worm press with adjusting element of the head bushing slot

Brief CV
  • Education: Ph.D. degree in Building and Exploitation Machines Science (Gdansk Univ. Tech. 2006), M.Sc. Eng. in Mechanic and Construction of Machines Science (Olsztyn University of Warmia and Mazury 2002-2004), Eng. in Mechanical Engineering Science (Elblag The State University of Applied Sciences 1998-2002).

  • Professional experience: Warsaw University of Life Sciences (from 2012), GE Company (2008-2012), Engineering Design Center - Warsaw Institute of Aviation (2007-2008).

Conferences

Forthcoming conferences:

  • CMES 2023 8th International Conference of Computational Methods in Engineering Science CMES 23, 23-25 November 2023, Pulawy, Poland

Past conferences:

  • CMES 2022 7th edition of International Conference of Computational Methods in Engineering Science CMES 24-26 November 2022, Zamosc, Poland

  • CMES 2019 4th edition of International Conference of Computational Methods in Engineering Science CMES 21-23 November 2019, Kazimierz Dolny, Poland

  • ICSHGE18 2nd International Conference on Sustainability, Human Geography and Environment 2018 ICSHGE18, 28 November-2 December 2018, Krakow, Poland

  • HTRSE-2018 17th International Conference HEAT TRANSFER AND RENEWABLE SOURCES OF ENERGY HTRSE-2018, 02 - 05 September 2018, Miedzyzdroje, Poland

  • 26 NJF Congress 26 NJF Congress: Agriculture for the Next 100 Years, 27-29 June, 2018 Kaunas, Lithuania

  • Rural Development 2017 8th International Scientific Conference RURAL DEVELOPMENT 2017: Bioeconomy Challenges, 23-24 November 2017, Kaunas, Lithuania

  • SEED 2017 International Conference on the Sustainable Energy and Environmental Development SEED 17, 14-17 November, 2017 Krakow, Poland

  • EEMS 2017 International Conference Energy, Environment and Material Systems EEMS 2017, 13-15 September, 2017 Polanica Zdroj, Poland

Prospective PhD students

If you are interested in doing your PhD under my supervision in our team in Warsaw, do not hesitate to send me a brief e-mail. Applicants would usually be expected to have a solid background knowledge in exploitation of vehicles and machines (engines and vehicles), but candidates specializing in other areas (e.g., computer programmers) are also welcome to contact me.

Footer text abcde12345